Harman-Kardon CDR 26 CD Player User Manual


 
8FRONT-PANEL INFORMATION DISPLAY
FRONT-PANEL INFORMATION DISPLAYFRONT-PANEL INFORMATION DISPLAY
N Sample-Rate Conversion Indicator: This indica-
tor lights when the Sample-Rate Converter is in use to
change the digital sample rate when the incoming signal
is not the standard 44.1kHz used by standard CDs. This
is an automatic function and does not require any user
intervention.
O Play/Pause Indicators: These indicators show the
status of the individual CD decks. The
lights when
the CD is playing, and the
±±
lights when the unit is in
a Pause mode.
P Record Indicator: This indicator lights while the
unit is making a recording and flashes during the
preparations for recording.
Q R/RW Indicator: This indicator shows which type
of recordable disc is present in the
Record Deck %.
When a CD-R disc is present, only the
R is lit. The RW
lights when an erasable CD-RW disc is in use.
R CD Indicators: These indicators light when a stan-
dard CD is playing in either deck
3 or %.
S Time Indicators: These indicators light in conjunc-
tion with one of the time indicators
TUVW to
show which of the time status modes is active.
T Remaining Time Indicators: These indicators light
when the
Information Display Y shows the time
remaining on a disc.
U Recorded-Time Indicator: While a recording is
in progress, and up until a CD-R or CD-RW disc in the
Record Deck % has been finalized, this indicator will
light, and the
Information Display Y will indicate the
total amount of time recorded on the disc thus far.
V Total Time Indicators: These indicators light when
the
Information Display Y shows the total time of all
tracks on a disc.
W Track Time Indicators: These indicators light
when the
Information Display Y shows the running
time of the individual track being played.
X Manual Indicator: This indicator lights when the
manual method of incrementing tracks is selected for a
recording session. See page 20 for more information
on track increments.
Y Information Displays: These displays serve two
functions, showing the time displays for discs playing,
and displaying messages about discs or recordings.