Filter
Top Products
Page 3
All Zones Off
If you wish to turn all zones off, press the knob and hold it for 3 - 5 seconds. Release the knob when the
display shows "FF". All zone amplifiers are turned off and the volume for each zone is set to "00".
Setting Zone Volume
Turning the knob on the VSC clockwise will increase the volume and counterclockwise will decrease
the volume in that zone. The volume is increased and decreased in 5 percent increments from 0-100
percent. The display on the VSC will display the current volume setting. When the zone volume is set
to 100 percent, the VSC will display 99.
If the zone is currently muted, turning the knob in either direction turns mute off and audio is heard at
the current volume setting. Any subsequent knob turns will increase or decrease the volume from the
current volume setting.
Source Selection
To change the audio source in a zone, press down on the knob. The current source number is displayed
on the VSC. Press again to cycle through all available audio sources. Each time the button is pressed
and then released, the next available source is displayed. If a particular source is not connected, it will
not be displayed and you will not have the option of connecting the VSC to that source. Once the last
source is reached, pressing down again will bring you back to the first source connected to the system.
If the VSC is displaying the source and there is no interaction with the VSC for 3 seconds, it will revert
back to displaying the current volume level.
Zone Menu
To adjust bass, treble, and balance level settings for a zone, press and hold the knob on the zone VSC for
1.5 - 3 seconds to enter the Zone Menu. Release the knob when the display shows "bA".
In the Zone Menu, you can cycle between bass, treble, and balance level by pressing the knob. Each
time the button is pressed, the next item is displayed. Zone Menu items are circular; thus, when you are
on the last menu item (i.e. Balance) you will switch back to the first menu item (i.e. Bass) by pressing
the knob once again. When the item that you want to adjust is displayed, it may be modified by turning
the knob clockwise or counterclockwise. The initial values for the bass, treble, and balance are set to 0
and can range from -9 to 9.