Filter
Top Products
Page 2
Operation
When an audio zone is turned on and the Volume-Source Control (VSC) in that zone is idle, the blue
display will show the current volume level of the zone.
VOLUME
PUSH TO SELECT
VSC
You can change the zone power on/off state, select an alternative audio source, and adjust the zone
volume by either pressing or turning the knob.
All knob turns are ignored while the knob is being pressed.
Zone On/Off
If a zone is off, it can be turned on by turning the rotary knob at the zone VSC or by pressing the knob.
In response, the zone amplifier is turned on.
To turn the zone off, you must turn the knob counterclockwise until the display indicates "00". After
five seconds of inactivity, the display on the VSC and the zone amplifier are turned off.