Filter
Top Products
5
8 World Time Selecting switch
Turn the pointer towards the name of the c with the
same longitude as the place you v to locate, then you
can easily get it's present time shown on the display
as WORLD TIM
9 Time Set switch
LOCK When any timing has been properly adjust put the
switch in this position to lock it to prevent accidental
changed.
SLEEP Before using HOUR (13) and MINUTE (11) 1 Adjustor
to fix sleep timer when going to t set the switch in
this position first.
ALARM When setting the alarm time, switch to this position
first.
HOME Set the switch in this position before using HOUR It
(11) Time Adjustor to adjust the HOME TIME.
WORLD Set the switch in this position before using HOUR (1
3)/MINUTE (11) Time Adjustor to adjust the WORLD
TIME.
10 Timer Exchange Switch
home Home Timer with large figures is shown in the
upper part (3A) of the main display. World Time
with smaller figures is shown in the lower part (3E)
of the sub display.
world Home Timer with large figures is shown in the
upper part (3A) of the main display. World Time
with smaller figures is shown in the lower part (3E)
of the sub display.
11 Time Adjustor
Minute To adjust MINUTE shown on the display. The button
can be press either continuously or intermittently. If
it is pressed continuously, the display will advance
quickly.
12 Reset To reset the clock system to its normal and initial
condition.
13 Hour To adjust Hour shown on the display. The button can
be pressed either continuously or intermittently. If it
is pressed continuously, the display will advance
quickly.
14 Battery Compartment
2 UM-3 batteries for the radio
1 UM-3 battery for the clock movement( always
necessary)
15 External DC Jack
Dc 3v External DC source input, 3 Volts/200 mA, Center
negative.
16
Phone Jack
Terminal for stereo headphones with 26-32 Ohm
impedance. The built-in speaker will be disconnected
automatically when the headphone is in use.