Filter
Top Products
14
Using the Menu
Press the MENU button to enter the menu. Rotate the SELECT button to scroll
through the options described below.
Scan
Press the MENU button to access the menu.
Rotate
the SELECT button until “Scan setting” is displayed.
Push the SELECT button to select.
Rotate the SELECT button to select “All stations” or “Strong stations”.
Push the SELECT button to confirm.
Audio setting
Press the MENU button to access the menu.
Rotate
the SELECT button until “Audio setting” is displayed.
Push the SELECT button to select.
Rotate the SELECT button to select “Stereo or allowed” or “Forced mono”.
Push the SELECT button to confirm.
System Settings
To make adjustments to the settings in FM mode:
Press the MENU button to access the menu.
Rotate the SELECT button until "System" is displayed.
Press the SELECT button. The following options: Time, Backlight, Factory Reset
and Software (SW) version are available.
Further information on these settings can be found in the DAB mode section of this
User Guide.
03Daily Use
1
2
3
4
5
1
2
3
1
2
3
4
5
DON’T FORGET!
All subsequent scans will be made according to the setting chosen.
A * will show next to the current scan setting.
DON’T FORGET!
Forced mono will present all FM stations in mono.