Filter
Top Products
OPERATION GUIDE
DEACTIVATING THE ALARM
Press-and-release the POWER/STANDBY button until 'STANDBY' no longer
appears in the display. Then press-and-release the TIMER button until
'TIMER' disappears from the display.
HOW TO SET THE SLEEP TIMER
The sleep timer allows the radio to play for a specified number of minutes
before it turns off. It operates independently of the alarm feature. This is done
with the SLEEP button and can be done with the radio turned on or off. The
first press-and-release of the SLEEP button sets the sleep timer for 60 min-
utes (60 appears in the display). Each successive press-and-release reduces the
time to 50, 40, 30, 20, 10 and 0 minutes. The radio will automatically turn off
after playing for the selected time period. Selecting 0 minutes simply deacti-
vates the sleep timer.
USING YOUR SHORTWAVE LISTENING
Thoroughly read the SHORTWAVE LISTENING GUIDE included with your radio. It
completely explains everything needed to successfully enjoy shortwave listening.
Once you have read about shortwave "bands", use the examples below to try
out your radio's shortwave abilities. Refer to pages 6 through 9 of the SHORT-
WAVE LISTENING GUIDE.
Note: your radio shows shortwave frequencies in megahertz (MHz).
HOW TO TUNE AROUND IN A SHORTWAVE BAND
Let's use a specific example to learn how to "tune around" in a shortwave
band and find stations. It's really no different from tuning around in the AM
and FM bands for finding local stations. We will use the shortwave 31 meter
band, an evening band, in the example below, but you can substitute any other
band based on it's suitability for the time of day that you are listening, e.g., 19
meters during daylight hours. Refer to pages 6 through 9 of the SHORTWAVE
LISTENING GUIDE.
11
OPERATION GUIDE
HOW TO SET THE CLOCK
NOTE: this is a 24-hour clock system, e.g., 6 p.m. is shown as 18:00 hours. The
clock can be set with the radio turned on or off. While keeping the TIME SET
button pressed-in, press the + button to set the hour and the - button
to set the minutes. Release the TIME SET button when finished.
HOW TO SET, ACTIVATE AND DEACTIVATE THE ALARM
The alarm feature can be set to turn the radio on and off at a specified time.
Setting the alarm ON/OFF times can be done while the radio is turned on or off.
NOTE: in the setting procedures outlined below, each successive step must be
performed within 5 seconds of the previous step, otherwise, the setting proce-
dure must be started again.
SETTING THE ALARM-ON TIME
1. Press-and-release the TIMER button until 'TIMER ON' is in the
display.
2. While keeping the TIME SET button pressed-in, press the + button
to set the hour and the - button to set the minutes for the alarm
turn-on time.
3. Release the TIME SET button . After setting, 'TIMER ON' in the
display will change to 'TIMER'.
SETTING THE ALARM-OFF TIME
1. Press-and-release the TIMER button until 'TIMER OFF' is in the
display.
2. While keeping the TIME SET button pressed-in, press the + button
to set the hour and the - button to set the minutes for the alarm
turn-off time.
3. Release the TIME SET button . After setting, 'TIMER OFF' in the
display will change to 'TIMER'
ACTIVATING THE ALARM
Press-and-release the TIMER button until 'TIMER ON' is in the display.
'TIMER ON' will change to 'TIMER' after 5 seconds. Now press-and-release the
POWER/STANDBY button . 'STANDBY' appears in the display above 'TIMER'.
The alarm is now activated. Remember to select your desired station and
volume level before activating the alarm function.
10
15 3 4
3
4
13
4
3
9
9
13
10
10
15
9
15
15
15
15
9