Filter
Top Products
7
1. Cannot connect transmitter to TV because TV has no
headphone jack or audio output jack.
If your TV has no audio output jacks, then it is probably
not a stereo TV. In this case, connect the transmitter to the
VCR (if you have a VCR connected to your TV).
2. Poor sound quality (Distortion).
Distance between speaker and transmitter may be out
of optimum range or transmission may be affected by
interference. Select another channel on the transmitter &
press the auto tune button on the speaker.
Battery power is insufcient. Replace the batteries.
3. No sound or no signal at the speaker.
Transmitter is not on.
Transmitter has no power (power adaptor not plugged
into AC outlet and/or not connected to the transmitter) or
the audio source has stopped sending audio signal to the
transmitter.
Audio source is not on or transmitter’s audio cord is not
connected to an audio source, or audio source volume (or
amplication) is too low to generate a signal.
Speaker is not turned on or its volume is set too low.
TROUBLE SHOOTING