Filter
Top Products
6
1. Plug the transmitter AC/DC power adaptor into an AC
outlet and connect the adaptor’s power output plug to the
back of the transmitter marked DC9V.
2. Connect the audio connection cable to the AUDIO IN
socket with the other end of the cord connected to your
audio source (e.g. stereo system, TV system, etc.). You
can use the provided 3.5 - 6.3 mm plug adaptor or 2-RCA
phono-plug adaptor to suit the connection of your audio
source.
3. The transmitter will automatically power up when there
is an audio signal received from your audio source. The
red LED light will illuminate to indicate the transmitter is
powered ON.
4. Set the “CHANNEL” button to select the transmission
channel as displayed by the channel indicator.
5. Ensure the antenna is extended completely vertical to
provide maximum coverage.
1. Use the provided 12V AC/DC adaptor to power each
speaker. Plug the speaker AC/DC power adaptor to an AC
outlet and connect the adaptor’s power outlet plug to the
back of the speaker marked DC 12V. Each speaker can
also be powered by 8AA batteries.
2.Since it has equipped with Auto tune function, you just
need to change the channel switch on the transmitter for
optimum signal.
TRANSMITTER SET UP & OPERATION
SPEAKER SET UP & OPERATION