Genesis Advanced Technologies G6.1c Speaker System User Manual


 
ver 1.0
5
55
5
~ÄëçäìíÉ=ÑáÇÉäáí
ó
1.3 Connections
The speakers should be connected directly to the speaker-level output
of your power amplifiers using high quality speaker cables and the 5-
way binding posts.
The high-level thru-put binding posts are for connecting to a subwoofer.
We recommend the Genesis ServoSub™ 4/8 as the perfect
complement to this speaker.
1.4 Adjustments
Don’t be too worried by the knobs on the back of the
G6.1c. Just set both knobs to the 12 o’clock position.
That is a good place to start. The G6.1c will sound great,
straight out of the box, set-up like this. As you play your
system for the next hundred hours or so, the speaker
will settle in and break in.
If you have at least 12 inches (30cm) of space
between the back of the speaker and the rear wall, the
rear tweeter should be left ON. Otherwise, turn the
rear tweeter off with the tweeter defeat switch on the
back panel.
Once you familiarize yourself with its performance,
putting a little bit of additional effort into tuning the
speaker properly for your system (which includes the
room), will give you greater long-term enjoyment and
benefits.