Genesis Advanced Technologies G5.3 Speaker System User Manual


 
ver 1.0
12
1212
12
~ÄëçäìíÉ=ÑáÇÉäáíó
bright and you will have to turn the tweeter control down
significantly.
On the other hand, large sofas and arm-chairs tend to absorb
frequencies in the lower mid-range and mid-bass. When your
room is full of furniture, you may find that you have to turn down
the tweeter, midrange, and bass gain.
Ultimately, an enjoyable and musical system is all about balance.
You have a number of controls at hand with which to adjust the
bass response, the low-pass filter frequency and woofer volume.
You can also move the speakers closer together for better
speaker to speaker mid-bass coupling, or further apart for less.
You can tilt the tonality of the speaker towards bright or dry with
the tweeter control, and forward or laid-back with the midrange
control.
Home Theater and Multi-Channel Music
While the Genesis 5.3 was designed with the audiophile in mind, its
performance and features make it ideal for Home Theater as well.
The G5 is truly a full frequency loudspeaker that satisfies the
requirement for Dolby Digital and DTS cinema reproduction.
However the combination of the low frequency capability and a
unique set of controls and connections on the G5 provide Home
Theater users benefits beyond other loudspeakers on the market.
In essence, the G5 has a servo-controlled subwoofer already
included in each speaker. This capability allows the G5 to
reproduce the low frequency effects (LFE) signal available on all
modern movie decoders. An additional benefit of using this feature
is that the LFE will come from two (or more) locations in your room
versus using a single subwoofer for LFE. Utilizing this capability
dramatically reduces room bass mode and bass node problems.
This results in smoother bass integration in the room, and a huge
system impact capability.
LFE Input
The Low Frequency Effects (LFE) input allows the G5 to be used in
addition to, or in place of, a separate sub-woofer. The LFE input
blends the low frequency effects signal from the home theatre
processor into the woofer section of the speakers.