Filter
Top Products
INSTALLATION
8
1 - HOW TO SET THE BATTERY
The CLA-30/40 amplifier needs to be supplied with a 9V PP3 battery (not
provided).To insert the battery into the amplifier simply follow instructions
below:
- Open the battery compartment located on the base by pressing the little
plastic lock.
- Insert the 9Vbatterywiththecorrectpolarity in the battery compartment.
- Replace the battery cover.
- The amplifier isnowreadytobeconnected to the phone.
2 - HOW TO CONNECT THE CLA-30/40 TO THE PHONE
To connect your phone to the CLA-30/40 amplifiersimplyfollowinstructions
below:
- Unplug thehandsetfromyourtelephone base socket.
- Connectthelittle lead supplied withtheCLA-30/40to the base socketandto
the CLA-30/40 socket (1) locatedontherearside.
- Connect your handset with its curly cord the CLA-30/40 socket (2) located
on the frontside.
-After a fewsecondsthe battery LED will light.
IMPORTANT:
If you don’thavethedial tone, you will have tousethetwelve position switch
located onthebottom.Thisswitch is used to matchthehandset connection to
the most phones on the market. If the microphone or the earpiece does not
work properly simply follow instructions below:
- Replace thehandseton the cradle and hook-on again.
-Adjust the switch position togetthedialtone (earpiece and microphone),
CLA-30/40 is now ready to use.