Filter
Top Products
5
C
Setting Up Your
New KAS-103, KAS-203,
or KAS-303 System
Speakers
CAUTION: Make sure that you consult your
amplifier’s owner’s manual regarding
speaker setup. Your amplifier should be
turned off throughout this procedure.
KAS-103 SETUP
IMPORTANT: Make certain all stereo
system components including the
subwoofer are turned OFF before
proceeding.
Refer to Figure 4 for proper connection.
Use the supplied male RCA to RCA line
level cable to connect the subwoofer to the
receiver. The satellites connect to the
receiver as shown with the red/black wires
supplied. Be sure to maintain proper
polarity when connecting the satellites and
center. Make sure the red wire goes to the
(+) positive and the black wire goes to the
(-) negative on both the receiver and
speaker.
Figure 4: KAS-103 Setup
SETUP