Filter
Top Products
Model RM-2 Owner’s Manual
7
<Speaker section>
• Unit: 110 x 40 mm, cone type, magnetically shielded type x 2
• Impedance: 8 ohms
• Output sound pressure level: 84 dB/W (1m)
• Frequency response: 200 Hz to 20 kHz
<Power amplifier section>
• Rated output power: 10 W or more (8 ohms, 1 kHz)
• Residual noise: -60 dBV or less (DIN AUDIO)
• Distortion: 0.5 % or less (10 W/4ohms, 1 kHz)
• Digital input
Connector: XLR-3-31 type
Format: IEC 60958 (AES/EBU)
Sampling frequency: 44.1 kHz to 96 kHz
• Analog input
Connector: XLR/ 1/4 combi-jack
Nominal input level: +4 dBu (XLR), -10 dBV (1/4")
Input impedance: 10 kohms or more
• PHONES
Connector: 1/4-inch stereo jack
Applicable load impedance: 8 ohms or more
Rated output power: 20 mW + 20 mW (32 ohms, 1 kHz)
• Level meters: 26-dot LED meter x 2
When digital input is selected: Peak metering, 0 dB: 0dBFS
When analog input is selected: VU metering, 0dB: +4 dBu/-10 dBV
<General>
• External dimensions: 430 (W) x 44 (H) x 260 (D) mm
• Weight: Approximately 3.5 kg
• Power requirement: 120VAC 60Hz (for US and CANADA version)
230VAC~240VAC 50/60Hz (for Europe version)
• Power consumption: 10 W
• Supplied accessories: Power cord, Owner's manual, Rack mount adaptor x 2, Rubber foot x 4
* Specifications and appearance are subject to change without notice for product improvement.
Main Specifications
STEREO RACK MONITOR
RM-2
CH SEL
DIGITAL
ANALOG
INPUT
+6420
60 12 6 4 2 0OL52 44 36 28 16
-
20
28 7 320 16 10 5
-
R
MUTEMONO
DIGITAL
0246+L
1628364452 OL024612
20
5101620
-
3728
VU
-
60
[dBFS]
PEAK
PHONES
MIN MAX
RL
482
260
44
430