Filter
Top Products
INTRODUCTION
Thank you for choosing the FOCAL SM11.
The SM11 is a world class Professional Digital Monitoring System.
It has been designed to offer superb imaging, outstanding precision and frequency extension, in a compact format
suitable for mid or near field monitoring.
This exceptional acoustic performance comes together with tremendous versatility, thanks to the digital nature of the
system with numerous controls accessible either from a computer or wirelessly from a PDA (Personal Digital Assistant).
For both cases an easy-to-use and friendly programme is provided by Focal. Additionally and for simple gain control
and mute, a proprietary remote control is also available as an option.
Unpacking
In addition to one loudspeaker and a user manual (such as this one), each carton should contain:
• A power cord
• A MIDI cord
• A CD-ROM
• A copy of the "Focal Manager" user manual
• A copy of the SM11 White paper
• A "quick start" leaflet
• A guarantee card
Please check that none of these items are missing, and remove all accessories from the carton.
To remove the loudspeaker from its carton without damage, open the end flaps fully and bend them right back. Then remove
the upper cushion and lift the loudspeaker out gently: please beware that one of the enclosure sides may hold a passive radiator
and thus handling of the speaker requires special care.
Inspect the speaker for signs of any possible damage. In the unlikely event of this having occurred please inform the carrier and
supplier. It is a good practice to keep the packaging in case of future transportation.
Preliminary recommendations
We would like to give a word of warning about the high sound pressure levels that can be generated by the SM11’s. Because
of their very low levels of distortion, and the minimal fatigue incurred by the user, it is not always obvious to realise the actual
sound pressure level whilst working.
Please bear in mind that exposure to excessive levels over a sustained period of time may lead to permanent hearing loss.
After having unpacked the unit, first check that the operating voltage is correctly set (see location on rear panel figure...). If it is
not, adjust the selector to the appropriate position. Also check and if necessary replace the fuse, which rating depends on the
operating voltage (please refer to technical specifications).
Warranty
This product is guaranteed against defects in components and workmanship only, for a period of one year from the date of
shipment to the end user. During the warranty period Focal will, at their discretion, either repair or replace products which prove
to be defective, provided that the product is returned, shipping prepaid, to an authorised Focal service facility.
Defects caused by unauthorised modifications, accident, negligence or any misuse are not covered by this warranty.
For further information please contact your dealer or the distributor in your country.
3
notice sm11 3 19/03/04, 15:22:37