Filter
Top Products
10
Range
Indicator
Sound Lights
Power/Volume Dial
Testing Sound Reception
• Place a receiver in the room where you intend to use it.
• Set the receiver(s) channel switch to the same channel as the transmitter.
• Turn the power/volume dial to turn the power ON. Wait a few seconds to see if you have a good
signal. If the range indicator light blinks along with beeping, you are out of range. Move the receiver
closer to the transmitter.
• When sound is picked up by a receiver, the sound lights turn on.
- One or two lights indicate quieter sounds.
- Three or more lights indicate louder sounds.
• If the range indicator begins fl ashing, you may be experiencing interference. Try selecting a different
channel on both the receiver and transmitter. If the range indicator continues to fl ash, move the
receiver closer to the transmitter.
SIDE VIEW
Channel
Switch