Filter
Top Products
Contents Copyright 2006 Final Sound Solutions.
8. CABINET CARE
The finish on the S100 is a high strength, scratch-resistant acrylic. However, as with all fine furniture finishes the
cabinet can still be scratched.
Always unplug the S100 prior to cleaning.
Do not clean or dust the cabinet with any abrasive cleaner. Use only a fine quality spray or wipe-on furniture/dust
cleaner.
Do not use any abrasive rag or scrubber. Use only a lint-free clean cloth.
Never use a liquid to clean the cabinet or amplifier.
9. SPECIFICATIONS
Size 30cm cube, with 5cm high feet
Weight 16 kilograms
Anechoic Frequency Response 30 Hz to 250 Hz, ±3 dB
In-Room Frequency Response Typically 25 Hz to 250 Hz, ±3 dB
THD Less than 3% THD at 94 dB SPL from 30 Hz and up
Maximum Output 110 dB SPL in room
Amplifier Type Discrete class A/B with linear power supply
Volume Adjustment 60 dB of range
Crossover Frequency 40 Hz to 250 Hz
Crossover Type 2
nd
order Butterworth (12 dB/octave, Q=0.707)
Subsonic Filter 2
nd
order Butterworth at 22 Hz
Phase Adjustment Selectable between 0 to 180 degrees
Power Output 100W RMS/200W Peak
Power Consumption 200W RMS on/12W in standby
Low Level Input Impedance 20 kΩ
High Level Input Impedance 2 kΩ
Effective Internal Volume 22 liters sealed with 400 grams of polyester stuffing
Driver 20 cm long throw driver with XBL
2
motor technology
8