Filter
Top Products
To connect to a DVD-Audio player with digital multichannel outputs (eg G98DH DVD Audio Transport)
'$($6$!UDIO4RANSPORT
X$)')4!,,%!$3
#/--3,%!$
'$IGITAL3URROUND#ONTROLLER
-5,4)
$)')4!,).054
$6$
#/--3#/--3
-!).$)')4!,/54
The G61 Digital Surround Controller provides 12 digital coax
inputs, six of which can be used as two multichannel inputs from
a source with a suitable digital multichannel output, such as the
G98DH DVD Player.
• Connect the MAIN DIGITAL OUT on the G98DH to the MULTI
DIGITAL INPUT 1 on the G61, using three 75Ω screened coax
phono leads.
• Connect together the COMMS sockets using the Comms lead
provided.
To connect to a source with analogue multichannel outputs (eg SACD or DVD-A player)
3!#$$6$!PLAYER
X0(/./,%!$3
$)')4!,,%!$
'$IGITAL3URROUND#ONTROLLER
-5,4)!.!,/'5%
).054
-5,4)#(!..%,
/54054
$)')4!,).054
$$)3#
$)')4!,
/54054
The G61 Digital Surround Controller provides eight analogue
inputs, three of which can be used as a multichannel input from a
source with a suitable analogue multichannel output, such as an
SACD player.
• Connect the ANALOGUE OUTPUT sockets from the source to the
analogue multichannel inputs on the digital surround controller
using six phono leads.
• Optionally connect a digital output from the source to digital
input D8 (DISC) on the digital surround controller, using a digital
phono lead.
You can then select the source corresponding to the multichannel
input (AUX) for playing surround material, and the source
corresponding to the digital input (DISC) to decode other formats.
Note: Multichannel analogue sources may have subwoofer level
outputs that vary by up to 10dB, so it may be necessary to reduce
the LFE level to give correct bass integration; see
DSP presets
, page
33.
Installing the
digital surround
controller
8