Meridian Audio C51 Speaker User Manual


  Open as PDF
of 10
 
C51manv1.0•REƒ•20070727
Meridian Audio Limited
Latham Road,
Huntingdon, Cambridgeshire PE29 6YE
UnitedKingdom
Tel +44 (0) 1480 445678
Fax+44(0)1480445686
Web: www.meridian-audio.com
Meridian is registered trademark of Meridian Audio Ltd
Other trademarks are the property of their respective owners.
Meridian America Inc
8055 Troon Circle, Suite C
Austell, Atlanta GA 30168-7849
USA
Tel +1 (404) 344 7111
Fax+1(404)3467111
Email: info@meridian-audio.com
• Reorientthereceivingaerial(orantenna)or
route the antenna cable of the receiver as far as
possible from the unit and its cabling.
• Ensurethatthereceiveruseswell-screened
antenna cable.
• Relocatethereceiverwithrespecttotheunit.
• Connectthereceiverandthisproductto
different AC outlets.
• Iftheproblempersistscontactyourdealer.
Drive units move when the C51 is
switched on or off
This is normal as the amplifier electronics
settle.
The sound from one or more speakers
is either muffled (lacking in HF) or
thin (lacking in bass)
Check that the crossover cards have been
correctly inserted, and in particular that the
type of crossover card in each bay matches
the type of loudspeaker connected to the
corresponding output channel. Each crossover
card includes indicator lights that show
the presence of power and, by their colour
combination, indicate the type of speaker for
which the card is designed. Confirm that these
are indicating correctly.
Unit stays in standby
This generally indicates a problem with the
trigger connection and/or setup:
• Checkthetriggercablingandthatitiscorrectly
wired.
• Ensurethatthesourcedeviceprovidingthe
trigger is configured to provide a voltage in the
range 5–30v ac or dc when the unit is required
to come out of standby and for the trigger
voltage to be removed when the unit is to enter
standby.
 previous