Filter
Top Products
RGB 109xi and RGB 112xi • Reference Information
Reference Information
A-2
Specifications
Specifications apply equally to both units, except where noted.
Video input
Number/type ................................ 1 analog RGBHV, RGBS, RGsB, RsGsBs
Connectors .................................... RGB 109xi: 1 15-pin HD male, 48"
(122 cm) long cable
RGB 112xi: 1 13W3 male, 48" (122 cm)
long cable
Nominal level(s) ........................... Analog — 0.3 V to 1.5 Vp-p
Maximum level(s) ......................... Analog — 1.5 Vp-p
Impedance ..................................... 75 ohms
Horizontal frequency .................... Autoscan 15 kHz to 130 kHz
Vertical frequency .......................... Autoscan 30 Hz to 120 Hz
Return loss ..................................... -30 dB @ 5 MHz
Maximum DC offset ..................... 4.0 V
Video throughput
Gain ................................................ Unity, 0.725 Vp-p with 50% peaking,
0.750 Vp-p with 100% peaking
Bandwidth ..................................... 300 MHz (-3 dB)
Video output
Number/type/format .................. 1 analog RGBHV, RGBS, RGsB
Connectors .................................... 6 BNC female
RGB 109xi: 1 15-pin HD female local
monitor output (buffered)
RGB 112xi: 1 13W3 female local monitor
output (buffered)
Nominal level ............................... Analog 0.70 Vp-p, 0.725 Vp-p, or
0.750 Vp-p
Impedance ..................................... 75 ohms
Return loss ..................................... -30 dB @ 5 MHz
Sync
Input type ...................................... RGBHV TTL (±), RGBS TTL (±),
RGsB 0.3V (-), RsGsBs 1.3V (-)
Output type .................................... RGBHV (±), RGBS(±), RGsB (-)
Input level ..................................... 2.0 V to 5.5 Vp-p with ±0.2 VDC offset
(max.)
Output level .................................. 4.0 V to 5.0 Vp-p
RGB 109xi and RGB 112xi • Reference Information
A-3
Input impedance .......................... 10 kohms
Output impedance ....................... 75 ohms
Max. propagation delay ............... 48 ns
Max. rise/fall time ........................ 3.5 ns
Polarity............................................ RGBHV: when RGBHV is input, polarity
follows input; otherwise negative
RGBS, RGsB: negative
Audio input
Number/type ............................... 1 PC level stereo, unbalanced
Connectors .................................... 1 3.5 mm stereo plug, 24" (61 cm) cable
from computer video connector, 2 channel;
tip (L), ring (R), sleeve (ground)
Impedance ..................................... 10 kohms, DC coupled
Minimum level .............................. 100 mV
Maximum level ............................. +8.5 dBu, .....(unbalanced) @ stated
%THD+N
Audio throughput
Gain ................................................ Unbalanced 0 dB, balanced +6 dB
Frequency response ..................... ±0.05 dB 20 Hz to 20 kHz
THD + Noise ................................. 0.03% @1 kHz, 0.3% @ 20 kHz at rated
maximum output drive
S/N ................................................. >90 dB, output 14 dBu, balanced
Stereo channel separation ........... >95 dB @ 1 kHz to 20 kHz
Audio output
Number/type ............................... 1 stereo (2 channel), balanced/unbalanced
Connectors .................................... 3.5 mm stereo captive screw terminal,
5 conductor, for left and right output
Impedance ..................................... 50 ohms, unbalanced, 100 ohms balanced
Gain error ...................................... ±0.1 dB channel to channel
Drive (600 ohm) ............................ > +14 dBu, balanced at stated %THD+N
General
Power ............................................. 100 VAC to 240 VAC, 50/60 Hz, 15 Watts,
internal, auto-switchable
Temperature/humidity ................ Storage -40° to +158°F (-40° to +70°C) /
10% to 90%, non-condensing
Operating +32° to +104°F (0° to +40°C) /
10% to 90%, non-condensing
Rack mount .................................... No