Filter
Top Products
IR Remote
PWR ON: 02 00 01 00
Projector Manufacturers
Manual
PC Projector
MLC 62 D Confi guration Software
MLC 62 D
MLC 62 D products are simple and easy to confi gure…
no programming knowledge is required
Free Extron Certifi ed Projector Drivers
Extron creates and administers thousands of certifi ed,
ready-to-use projector control drivers. These IR and
serial RS-232 drivers allow MediaLink Controllers to
communicate with any display device. They enable
control of basic projector functions such as power,
input selection, and volume adjustment. Go to the
Extron Web site at www.extron.com to download
drivers for the latest and most popular displays.
IR Learning
Serial RS-232 is the preferred method
of control; however, many ultra portable
projectors and fl at panel displays can only
support IR control. The MLC 62 IR D and the
MLC 62 RS D can learn IR commands from
virtually any handheld IR remote control
Custom Serial RS-232 Control
In environments where customizable projector
control is needed, integrators can easily enter in
their own RS-232 commands on the MLC 62 RS D.
RS-232 commands can be assigned to any button
using the provided confi guration software. The
MediaLink Controllers will work with virtually any
projector.
Extron-provided software allows
for customized projector control
IR Learning from a handheld IR Remote
Extron offers thousands of drivers from many major
projector and display manufacturers
Extron’s free MLC 62 configuration
software puts all of the most commonly
used system control options at your
fingertips. One of the costliest aspects
of building an A/V control system, in
terms of human resources and time, is
programming. A/V system programming
can be a complex task that requires the
skills of an experienced programmer.
Extron’s configuration approach offers
tremendous benefits over traditional
system programming methods. Configuring
MLC 62 D controllers is as simple as
selecting choices from intuitive, drop-down
menus instead of writing, compiling, and
debugging complicated computer source
code. Should system changes need to be
made in the future, such as a new display
device, need to be made in the future, an
experienced programmer is not required.
Nearly Anyone Can Confi gure A System
Non-programmers can use our free MLC 62
confi guration software to build a complete A/V
control system, freeing up programmers for other
projects.
System Changes Take Less Time
Confi guration means that initial system setup time
is reduced, and there’s no need to delay making
changes because you are waiting for a hard-to-fi nd
programming resource.