Filter
Top Products
USB Port
IR Learning
MLC 62 IR D - Back
MLC 62 IR D MLC 62 RS D
Control Port
Buttons 6 8
IR 1
RS-232 1
IR/RS-232* 1
Relay 2
Digital In 1
Inactivity Timer
MLC 62 D controllers are equipped with an adjustable timer that
automatically shuts down the projector or flat panel display after
inactivity, to conserve energy and extend projector lamp life.
Macro Capability and Toggle Mode
With the MLC 62 D’s macro capability, any button can be
configured to execute multiple actions. For instance, the touch
of a single button could trigger commands to turn on the display,
select the display’s computer input, and trigger a relay for screen
control. Toggle mode provides additional flexibility by allowing
two different sets of commands to be executed with alternating
presses of a button.
Free Extron Certified Projector Drivers
Extron creates and administers a large library of certified, ready-
to-use device drivers. Drivers designated as "Extron Certified"
were written by Extron and have been reviewed and tested with
third party devices. These IR and RS-232 drivers allow MLC 62 D
controllers to communicate with a display device, enabling control
of basic projector functions such as power, input selection, and
volume adjustment. Go to the Extron Web site at www.extron.com
to download drivers for the latest and most popular displays.
Room Control
The MLC 62 RS D has two relays, which allow it to control room
functions, such as raising or lowering a projector screen, and
turning lighting on or off. In addition, a digital input allows the
MLC 62 RS D to monitor a switch or sensor.
Easy to Configure
The MLC 62 D controllers offer easy setup using configuration
software or IR learning. Easy-to-use Extron configuration software
provides fast and simple setup via USB, and includes support for
the extensive library of Extron certified, ready-to-use IR and RS-232
device drivers. The USB port is conveniently located behind the
removable Decora wallplate for easy configuration access without
having to remove the installed controller. Configurations may be
saved, then restored to other controllers for replicating common
room configurations. IR learning allows the controller to be set up
directly from the display's IR remote without the need for software
and a PC.
Introduction
MLC 62 D
MLC 62 IR D
The MLC 62 IR D is ideal for many basic
classroom and conference room applications.
It offers an IR port for controlling the display
device.
MLC 62 RS D
The MLC 62 RS D is ideal for rooms where
additional control is necessary. It offers a
dedicated unidirectional RS-232 port and a
configurable port that supports either IR or
RS-232. These ports allow up to two devices
to be controlled, such as a display and a
switcher, or a source device. Two relays allow
the MLC 62 RS D to control screen functions
or lighting. A digital input allows monitoring of
a switch or sensor.
*Configurable IR/RS port can be either IR or RS-232
MLC 62 IR D and MLC 62 RS D Port Comparison
Easy configuration without having to remove
installed controller