DA AV EQ Series • Installation and Rear Panel
Installation and Rear Panel, cont’d
DA AV EQ Series
3
Chapter Three
Front Panel Features and
Operation
Front Panel Features
Gain and Equalization Controls
The following table shows the resulting gain levels for each
possible jumper position and balanced/unbalanced wiring
combination.
Balanced
0 dB
+6 dB
Un balanced
-6 dB 0 dB
Output
Wiring
Balanced
(Jumper on right
and middle pin)
Unbalanced
(Jumper on left
and middle pin)
Jumper
Position
For example, if you wire output 1 as an unbalanced audio and
you place the jumpers for both channels on the left and middle
pins, the gain is 0 dB.
2-14