Filter
Top Products
7. Attach the speaker wire to the strain relief tie down point using the provided zip
tie.
Captive Screw
Connector
Strain Relief Tab
(zip tie)
Figure 40. Attaching the Speaker Wire to the Strain Relief Point
8. Mount the CS 26T (see figure 41).
a. Insert the CS 26T through the bottom of the hole in the ceiling tile that was cut in
step 2.
b. Tighten the four screws (clockwise) until the speaker is securely clamped to the
ceiling.
Figure 41. Mounting the Speaker to the CS 120P
ATTENTION: Do not overtighten the screws.
CS 26T and CS 120P User Guide • Installation 24