Filter
Top Products
3G-AE 100 • Panels and Cabling 2
Panels and
Cabling
This section covers the following:
• Front Panel Features
• Rear Panel Features and Cabling
Front Panel Features
3G-AE 100
MULTI-RATE SDI AUDIO EXTRACTOR
270 Mbps 1.485 Gbps 2.97 Gbps
RATE
NOT
RECOGNIZED
1 2
a Power LED — lights green when the unit is receiving power.
b Rate LEDs — indicate the data rate of the incoming SDI signal (270 Mbps,
1.485 Gpbs, or 2.97 Gbps). If a signal is unrecognized, the “Not Recognized” LED will
light.
Rate LEDs will light once from left to right as a power up sequence when the unit is
powered.
Rear Panel Features and Cabling
The following section covers rear panel features and cabling procedures. If mounting is
necessary before connecting cables, see the Mounting section on page 7.
ATTENTION: Turn the input and output devices off and unplug their power cords.
Verify that the 3G-AE 100 is disconnected from the power source before proceeding.