Filter
Top Products
ETON SOUND 100 OPERATION MANUAL
4
5
WORKING WITH MEMORY PRESETS
There are 10 memory presets total, 5 each forAM, FM. Note that the
procedures below will also overwrite what has been previously stored
into the memory.That is, a memory cannot be ‘erased’,but can be
overwritten.
1. Using the procedures described previously,tune to the radio station
that you wish to store.
2. Press the MEMORY button for 2 seconds;the memory number will
flash in the LCD,
3. Immediately select the desired memory number withTUNING/SET
buttons.
4. Press the MEMORY button again.
Tune to the band of your choice,AM or FM.
Use quick,short presses of the MEMORY button to choose stored sta-
tion of your choice, or use the remote’s buttons 1-5.
Install twoAA batteries to save these settings during power loss or
when unplugging the Eton Sound Radio (see diagram).
The clock,alarm, and sleep timer can be set in either ‘standby’ or‘on’
mode.
1. Press the radio’s or the remote’sTIME SET button for 3 seconds;
note that the minutes flash.
2. Use the radio’sTUNING/SET buttons or the remote’sTUNE +/- but-
tons to set the minutes.
3. Give the radio’s or the remote’sTIME SET button a quick, short
press: note that the hour flashes.
4. Use the radio’sTUNING/SET buttons or the remote’sTUNE +/- but-
tons to set the correct hour.
5. Press the radio’s or the remote’sTIME SET button to complete the
new time setting and to exit the time set mode.
1. Press the radio’s or the remote’sALARM button for 3 seconds; note
that the hour flashes.
2. Use the radio’sTUNING/SET buttons or the remote’sTUNE +/- but-
tons to set the desired wake-up hour.
3. Give the radio’s or the remote’sALARM button a quick, short press;
note that the minutes flash.
4. Use the radio’sTUNING/SET buttons or the remote’sTUNE +/- but-
tons to set the correct minutes.
5. Press the radio’s or the remote’sALARM button; note that the
speaker symbol flashes for 5 seconds and then disappears.The alarm
time is now set.
SETTING THE CLOCK
ACCESSING MEMORY PRESETS
SETTING THE CLOCK, ALARM AND SLEEP TIMER
SETTING THE ALARM TIME: