Filter
Top Products
2
3
ETON SOUND 100 OPERATION MANUAL
WHAT THE ETON SOUND RADIO INCLUDES
Owner’s manual; remote control.
Grip the plastic piece on the bottom of the remote unit and pull it
out.
Plug the Eton Sound Radio Power Cord into anAC (mains) outlet.
When it is first plugged in, it will be in the standby mode.In standby
mode, only the clock display is activated and the radio is off.To turn
the radio on,use a quick, short press of the power button that’s on
the radio or the remote.To place it back into standby mode, use a
quick, short press of the power button.
The volume is controlled with the volume knob or theVOL buttons on
the remote.Turningthe volume knob clockwise increases the volume;
counterclockwise decreases volume.Pressing the remote’sVOL +
increases the volume; pressing theVOL — button decreases the vol-
ume.
Before place Earphone/Headphone in/on you ears,turn the volume all
the way down.Use Headphone/Earphone with 1/8 inch (3.5 mm)
stereo plug.Plug them into the earphone socket on the back of the
Eton Sound Radio.
After turning on the radio, use sequential presses of the MODE but-
ton on the radio or the remote to selectAM/FM or LINE-IN.
Use quick,short presses of the TUNING/SET buttons to tune up + or
down — frequency,or use the remote’sTUNE +/- buttons.
With auto-scanning the radio stops at the next station with good sig-
nal strength.Auto-scan tuning is engaged by a long, 2 second press
of theTUNING/SET buttons.To auto-scan up frequency,press Å but-
ton.To auto-scan down frequency,press the Ç button,or use the
remote’sTUNE +/- buttons.
VOLUME CONTROL
PREPARING THE REMOTE FOR USE
POWERING THE ETON SOUND RADIO
VOLUME CONTROL
SELECTING AM/FM OR LINE-IN
MANUAL TUNING
AUTO-SCAN TUNING