Filter
Top Products
Selecting an Image Source
If you connected multiple image sources to the projector, such as a computer and DVD player, you may
want to switch from one image source to the other.
1. Make sure the connected image source you want to use is turned on.
2. For video image sources, insert a DVD or other video media and press its play button, if necessary.
3. Press the button for the source you want on the projector's control panel or remote control. If there is
more than one port for that source, press the button again to cycle through the sources.
1 Computer port source
2 BNC port source
3 Video port source (composite video)
4 S-Video port source
5 Networked computer source
6 DVI-D port source
7 HDMI port source
8 SDI port source (PowerLite Pro Z9870UNL/Z10000UNL/Z10005UNL)
9 HDBaseT port source
Parent topic: Using Basic Projector Features
107