Filter
Top Products
31
Problem Solving
This section explains how to interpret the projector’s status lights, solve problems with the
picture and remote control, and contact technical support.
What To Do When the Lights Flash
The lights on top of the projector indicate the
projector’s status and let you know when a
problem occurs.
If the projector isn’t working correctly, first turn
it off, let it cool, and unplug it. Then plug the
power cord back in and turn on the projector. If
this doesn’t solve the problem, check the status
lights on top of the projector.
The P power light is orange.
The projector is in standby mode. Unplug it or press the P
Power button to turn it on.
The P power light is flashing green.
The projector is warming up. Wait for the picture to appear.
The P power light is flashing orange and you can’t turn on the projector.
The lamp is cooling down. Wait until the light stops flashing, then press the P
Power
button.
The P power light does not come on.
Make sure the power cord is connected securely both at the power outlet and the projector. If
you’ve just replaced the lamp, make sure the cover is securely fastened.
Power light
Warning light