Epson PowerLite Cinema 740HD Home Theater System User Manual


 
1 Power light
2 Status light
3 Lamp light
4 Temp (temperature) light
Power light Status light Lamp light Temp light Status and solution
Blue Blue Off Off Normal operation
Blue Flashing blue Off Off Warming up or cooling down
Blue Off Off Off Standby or sleep mode
Flashing blue Light status Light status Flashing Projector is too hot.
varies varies orange
Make sure that the vents and air
filter are not clogged with dust or
obstructed by nearby objects.
Clean or replace the air filter.
Make sure the environmental
temperature is not too hot.
Off Flashing blue Off Orange Projector has overheated and
turned off. Leave it turned off to
cool down. Once the Temp and
Status lights turn off and the power
light turns blue (after about five
minutes), try the suggestions
below:
Make sure that the vents and air
filter are not clogged with dust or
obstructed by nearby objects.
Clean or replace the air filter.
If operating the projector at high
altitude, turn on High Altitude
Mode.
If the problem persists, unplug
the projector and contact Epson
for help.
156