Epson Home Cinema 3500 Home Theater System User Manual


 
7 HDMI (OUT) port (connects to display devices such as a television)
8 HDMI input ports (connect to your input devices; HDMI/MHL port on the side of transmitter)
9 3D glasses charging port (connects a USB cable to charge the 3D glasses)
10 Setup button (press for 5 seconds to reset the transmitter's settings)
11
power light (lights green when transmitter is operating or turned on; lights orange when the
transmitter is on standby)
12 WiHD light (lights orange when sending a wireless signal to the projector)
13 Link light (lights orange when connected to the projector; flashes orange when searching for the
projector or when on standby)
Parent topic: Using WirelessHD
WirelessHD Transmitter Placement
Keep these considerations in mind as you select a WirelessHD transmitter location:
Orient the WirelessHD transmitter with its lights facing the front of the projector.
Place the WirelessHD transmitter within 32 feet (10 m) of the projector and in the same room.
Ensure there is a clear path between the projector and the WirelessHD transmitter.
Avoid placing the WirelessHD transmitter in an area with many large or metal objects. Do not place the
WirelessHD transmitter on a metal surface, as this may interfere with the signal.
Parent topic: Using WirelessHD
Connecting the WirelessHD Transmitter
You can connect up to five HDMI input sources and one HDMI output source to your WirelessHD
transmitter.
85