Epson Home Cinema 3500 Home Theater System User Manual


 
2. Click the Arrangement tab.
3. Select the Mirror Displays checkbox.
Parent topic: Solutions When "No Signal" Message Appears
Solutions When "Not Supported" Message Appears
If the "Not Supported" message appears, try the following solutions:
Make sure the computer's display resolution does not exceed the projector's resolution and frequency
limit. If necessary, select a different display resolution for your computer. (See your computer manual
for details.)
Parent topic: Solving Image or Sound Problems
Related references
Supported Video Display Formats
Solutions When Only a Partial Image Appears
If only a partial computer image appears, try the following solutions:
Try adjusting the image position using the Position menu setting.
Press the Aspect button on the remote control to select a different image aspect ratio.
Check your computer display settings to disable dual display and set the resolution within the
projector's limits. (See your computer manual for details.)
Check the resolution assigned to your presentation files to see if they are created for a different
resolution than you are projecting in. (See your software help for details.)
Parent topic: Solving Image or Sound Problems
Related references
Input Signal Settings - Signal Menu
Supported Video Display Formats
Solutions When the Image is Not Rectangular
If the projected image is not evenly rectangular, try the following solutions:
Place the projector directly in front of the center of the screen, facing it squarely, if possible.
Before using the projector's keystone correction feature, make sure the projector lens is in the center-
top position using the lens shift dials.
Parent topic: Solving Image or Sound Problems
134