Filter
Top Products
10
I. Setting the Network configuration
In order to receive the internet radio program, IRX needs to connect to the
internet. You can connect the IRX in you LAN, either by Ethernet cable or
WiFi connection.
A. Network connection
You can use an Ethernet cable to connect the LAN port of IRX and a LAN
port of your router.
Note:
Your router should be setup to be able to link to your Internet
Service Provider.
If your router supports DHCP, then IRX can get an IP address automatically.
From the Main menu, press , key to select "Configuration" item, press
ENTER or key to enter the Configuration menu. Select "Network" and
press ENTER or key to enter the IP Configuration submenu. Select
"Auto Setting(DHCP)", press ENTER or key to enable the Auto Setting.
Note:
The above steps will be abbreviated as "Configuration
Network IP Configuration Auto Setting (DHCP)" in this
manual.
Otherwise, you can set the IP address manually. From the Main menu,
select "Configuration Network IP Configuration Manual Setting
IP Address " to set the IP address. And then input the Subnet Mask,
Default Gateway, and Preferred DNS Server from the same menu screen.
Note:
Please use, keys to change the value of IP address, Subnet
Mask, Default Gateway, and Preferred DNS.
ENGLISH
(GB)