Filter
Top Products
Safety Precautions
Read this User’s Guide thoroughly before attempting to install and configure the Emotiva XPA-
1 Amplifier. All the safety and operation instructions should be read before any operation of the
component(s) begin. After successful installation and configuration of the Emotiva XPA-1 Amplifier, be
sure to retain this manual in a safe place for any future reference needs.
All warnings on the Emotiva XPA-1 Amplifier and in these operating instructions should
be followed. Safety is a key component to a long lasting and trouble free installation.
The vast majority of the subsequent safety precautions involve simple common sense. If
you are not comfortable with the installation of audio/video entertainment equipment, it
will be to your benefit to seek the services of a qualified installation professional.
NEVER use the XPA-1 Amplifier near water such as a bathtub, washbowl, kitchen sink, laundry tub,
in a wet basement, or near a swimming pool, etc. There is a risk of electric shock to your body and
permanent damage to the equipment. Electric shock may result in permanent bodily injury or death.
The Emotiva XPA-1 Amplifier should be situated so that its location or installation position does not
interfere with proper ventilation. The Emotiva XPA-1 Amplifier should not be situated on a bed, sofa,
rug, or similar surface that may block any ventilation openings; or placed in a built-in installation such
as a bookcase, cabinet, or closed equipment rack that may impede the flow of air through ventilation
openings. If installed in a closed equipment rack for custom installations, be sure to add forced air
ventilation so that it has adequate air circulation. The Emotiva XPA-1 Amplifier should be situated
away from heat sources such as radiators, or any other devices which produce heat.
The Emotiva XPA-1 Amplifier should be connected to a power supply only of the type described in this
User’s Guide and what is labeled on the XPA-1 component. Power supply cords should be routed so
that they are not in high foot traffic areas or pinched by items placed upon or against them, paying
particular attention to cords at the wall plugs, convenience receptacles, and the point where they
connect into the XPA-1 Amplifier. The power cord of the XPA-1 Amplifier should be unplugged from the
outlet when unused for a long period of time. When it’s time for cleaning the Emotiva XPA-1 Amplifier,
it should be cleaned only as recommended in this User’s Guide. Never spray liquids directly into the
component’s vent openings. Care should be taken so that small objects do not fall into the inside of
the XPA-1 Amplifier.
The following situations require your Emotiva XPA-1 Amplifier is serviced only by qualified service
personnel:
1. The power-supply cord or the plug has been damaged; or
2. Objects have fallen, or liquid has spilled into the component; or
3. The XPA-1 has been exposed to rain; or
4. The XPA-1 does not appear to operate normally or exhibits a marked change in
performance; or
5. The XPA-1 has been dropped, or its enclosure or chassis is damaged.
Page 3