Filter
Top Products
10
Any selected input will pass through to the Tape Monitor outputs except when the tape monitor is
selected. When the Tape Monitor is not selected, the selected input is sent to the main outputs as well as
the tape monitor outputs channels. When the Tape Monitor is selected, the Tape Monitor input is sent to
the main output channels.
10. HT Bypass Button
Push to bypass all of the preamp functions of the USP-1, allowing the USP-1 to be a pass through for left
channel, right channel and subwoofer controlled by an external multi-channel or ‘home theater’
processor.
11. Mute Button
Push to mute the USP-1.
12. Motorized Volume Control
Motorized precision film pot volume control is adjustable manually or with by remote.
13. Soft Touch Power Switch
This switch provides the ON/OFF control of the USP-1 from the front panel. When the unit is off and in
standby mode the switch glows amber. Once the unit is turned on, the switch glows blue. The unit can
also be turned ON and OFF with the supplied remote control.