Filter
Top Products
Important Safety Precautions and Explanation of Symbols
!
!
The exclamation point within an equilateral triangle is intended to alert the user to
the presence of important installation, operation, and service instructions in this
manual.
The lightning ash with arrowhead symbol within an equilateral triangle is intended
to alert the user to the presence of uninsulated dangerous voltages within the
enclosure that may be of sufcient magnitude to constitute a risk of electrical shock
to the user.
Please read this User Manual thoroughly before attempting to install, congure,
or operate the Mini-X A-100. After successful installation and conguration of the
A-100, be sure to retain this manual in a safe place for future reference.
Safety is a key component to a long lasting and trouble free installation. Please read
and follow all instructions and heed all warnings on the A-100 and in this manual.
The vast majority of the subsequent safety precautions are common sense. If you
are not comfortable with the installation of audio/video entertainment equipment,
you should seek the services of a qualied installation professional or call us for
help.
WARNING: To prevent the risk of re or electric shock, do not use the
Mini-X A-100 near water or in wet locations and do not expose it to rain or
moisture. Doing so may result in damage to the A-100 and the risk of electric
shock, which may result in bodily injury or death.
WARNING: To reduce the risk of electric shock, do not remove the cover from
the Mini-X A-100. There are no user-serviceable parts inside the A-100. Refer
all service to qualied service personnel.
To reduce the risk of electrical damage, verify that no short circuits are present
between terminals and/or speaker wires before applying power.
Do not install the A-100 near any heat sources such as radiators or heating vents.
Avoid installing the A-100 directly above other heat-producing equipment unless
sufcient ventilation or forced-air cooling is provided.
Do not install the A-100 in locations without proper ventilation. The A-100 should not
be operated on a bed, sofa, rug, or similar surface that may block vents. The A-100
should not be installed in an enclosed location such as a bookcase, cabinet, or
closed equipment rack unless sufcient forced-air ventilation is provided.
Connect the A-100 only to power sources of the correct voltage (as shown in this
manual and on the A-100). Ensure that the Input Voltage selector switch on the rear
of the A-100 is set to the appropriate voltage.
Protect power supply cables from being pinched, walked on, or otherwise damaged.
Be especially careful where the power cable enters the power outlet and
A-100 unit.