Filter
Top Products
Page 8
Quick Start
In order to get the most from your Mini-X A-100 amplier, we urge you to read the entire
manual. If you just want to connect it to a source and a pair of speakers and don’t need to
know about all the triggering options and other features right away, this section will cover
the basics you will need to get started.
• Find a secure location for your A-100.
• Verify that the Line Voltage switch (on the rear panel) is set for the correct voltage.
• Set the Power Mode switch to On (if you want the A-100 to stay on when you turn the
AC Power switch On) or Auto (if you want the A-100 to turn On when there is a signal
present and return to Standby when there is no signal).
• Connect the A-100 to a pair of 8 ohm or 4 ohm speakers using reasonably heavy gauge
speaker wires (at least 18 gauge).
• Connect a line level input source.
• Find some music you really like to listen to.
• Turn on the AC Power switch and turn up the volume a bit!
• Enjoy!
Consider taking the time to read the rest of this manual while you are comfortably enjoying
your A-100.