Emerson SB110A CD Player User Manual


 
7
CD OPERATION
Open the CD compartment lid by
pressing the CD OPEN button. Gently
press a disc, label side up, onto the
spindle until it locks in place. Close the
CD compartment lid. Insert headphones
into the Headphones jack.
1
While the unit is off, press the
PLAY/PAUSE ( )/POWER ON button
to start playback.
To pause PLAYBACK,
press the PLAY/PAUSE ( )/POWER
ON button again, the display will blink.
Press once again to resume playback.
2
TO PLAY A CD (THIS UNIT CAN PLAY STANDARD OR CDR/RW
DISCS)
Adjust the VOLUME control and DBBS
switch
as desired. To skip forward or
backward through the tracks on the disc,
press the SKIP/SEARCH
or
button. To search forward or backward
through the tracks on the disc, press and hold
the SKIP/SEARCH
or button.
1
4
2
3
3
When the disc is through playing, it will stop.
Press the STOP (
)/POWER OFF button to
stop the disc before it is finished; the total
number of tracks and playing time will
appear. Press the STOP (
)/POWER OFF
button again while in the stop mode to turn
the unit off or wait approximately 60 seconds
and the unit will automatically turn off.
4
NOTES:
This unit is capable of playing standard CDs or 3” singles; no adapter is required.
If a disc is inserted incorrectly, dirty, damaged or not present at all, the display will
show “disc”.
As each track is played, the track number and elapsed time are shown in the display.
To remove the disc, open the CD Compartment, hold the edge of the CD and gently
press the center spindle and lift the CD.
The maximum time of a CD is 74 minutes for this unit.
“OPEN” will appear in the display when the CD Door is opened.
This unit will play standard or CDR/RW discs.