Emerson RS1008 Stereo System User Manual


 
7
INSTALLING THE REMOTE CONTROL BATTERIES
Locate the Remote Control unit. The battery compartment is on the back side of the remote. Press down on
the battery door locking tab to open and remove the door.
Insert two fresh AAalkaline batteries in the battery compartment, then replace the battery door. Be sure to
insert the batteries according to the polarity (+ / – ) markings inside the battery compartment. If the batteries
are inserted incorrectly the remote control will not work.
BATTERY PRECAUTIONS
Follow these precautions when using batteries in this device:
1.) Use only the size and type of batteries specified.
2.) Be sure to follow the correct polarity when installing the batteries as indicated in the battery
compartment. Reversed batteries may cause damage to the device.
3.) Do not mix different types of batteries together (e.g. Alkaline and Carbon-Zinc) or old
batteries with fresh ones.
4.) If the device is not to be used for a long period of time, remove the batteries to prevent
damage or injury from possible battery leakage.
5.) Do not try to recharge batteries not intended to be recharged; they can overheat and
rupture. (Follow battery manufacturers directions.)
RS1008_ib042303.p65 23/4/2003, 14:517