Filter
Top Products
13
PLAYING RECORDS
This system includes a full-size, 3-speed, belt-drive turntable. You can play 33, 45,
and 78 rpm records.
1.) Turn the OFF-VOLUME control clockwise until a ‘click’ is heard, and set the
Volume to a low level.
2.) Set the Function (AM/FM/TAPE/CD/PHONO) selector to the PHONO position.
3.) Make sure that you have removed the stylus cover from the stylus and have
released the Tone Arm Lock that secured the tone arm to the tone arm rest.
4.) Set the turntable Speed Selector to the appropriate speed, 33, 45, or 78 rpm. If
you are playing 45 rpm ‘singles’, place the 45 rpm adapter on the center spindle.
5.) Place your record on the center spindle.
6.) Raise the Cue lever to lift the tone arm off its rest. Move the tone arm to the
edge of the record. The turntable starts automatically. Use the Cue lever to
gently lower the tone arm onto the record.
7.) Adjust the OFF-VOLUME control to the desired level.
8.) When the tone arm reaches the end of the record it automatically returns to the
tone arm rest and the record player stops.
9.) To turn the system ‘off’, rotate the OFF-VOLUME control counter clockwise
until a ‘click’ is heard. The POWER indicator goes ‘off’.
NOTE: Do not turn or stop the turntable manually. Moving or jarring the
Turntable without securing the Tone Arm clamp could result in damage to the
Tone Arm.
NR303TT_050704.p65 7/5/2004, 10:1413