Filter
Top Products
9
OPERATING INSTRUCTIONS
LISTENING TO THE RADIO
1.) To turn the system ‘on’, rotate the OFF-VOLUME control clockwise until a
‘click’ is heard, and set the Volume to a low level. The POWER indicator lights
up.
2.) Set the Function selector (AM/FM/TAPE/CD/PHONO) to the AM or FM band
as desired. The dial scale light comes ‘on’.
3.) Rotate the Tuning control to tune to the desired radio station. If you tune to a
strong FM Stereo station the FM ST. indicator will light and reception will be in
stereo. If you tune to a weaker FM station, the reception will automatically
switch to mono.
4.) Adjust the OFF-VOLUME control to the desired level.
5.) When you are finished listening turn the OFF-VOLUME control counter
clockwise until a ‘click’ is heard. The POWER indicator and the tuning dial light
go ‘off’.
Antenna Information
The AM bar antenna is inside the cabinet. If AM reception is unsatisfactory try
repositioning the cabinet slightly until the internal antenna is picking up the strongest
signal.
The FM wire antenna is located on the back cabinet. If necessary adjust the position
and direction of this antenna until you find the position that provides the best
reception.
VOLUME
PLAY/PAUSE STOP OPEN/CLOSE
F.R F.F EARPHONE
OFF
NR303TT_050704.p65 7/5/2004, 10:149