Filter
Top Products
11
OPERATION
1.) Press the POWER button on the main unit or the remote control. The main
display lighting comes ‘On’ and the STANDBY LED indicator goes ‘Off’.
2.) Select the Radio function by switching the CD/RADIO selector to RADIO
position.
3.) Select the desired band (AM, FM or FM ST.) with the Band selector switch.
4.) Rotate the TUNING control until the exact
frequency of the desired station appears on
the display. If you have tuned to an FM
Stereo station and the Band selector is set to
FM ST, the stereo indicator will appear in the
display.
Note: If you are listening to a weak or distant FM Stereo station and
reception fades or is noisy, setting the Band selector to the FM position
will normally provide some improvement. However the sound will no
longer be in stereo.
5.) Adjust VOLUME level and BASS BOOST control as desired.
6.) When you are finished listening press the POWER button on the main unit
or the remote control to turn the power 'Off'. The main display lighting goes 'Off'
and the STANDBY LED indicator comes 'On' again.
FM
4
1
2
3
5
5
MS7609_ib040303.p65 4/4/2003, 12:1311