Filter
Top Products
14
Programmed Playback
Notes:
• You can program up to 20 tracks on a disc to playback in any desired order. The
same track number can be programmed to play several times if desired.
• There is no PROGRAM button on the remote
control. The PROGRAM button is located on
the main unit only.
• The player must be in the Stop mode to enter
a program. You cannot enter a program
while a disc is playing.
1.) Load your disc and wait for the total tracks to appear. If the disc is playing press
the STOP
button and wait for the total tracks to appear.
2.) Press the PROGRAM button on the main unit.
The PROGRAM indicator and program number
"01" begin flashing in the display.
3.) Press the
/ SKIP/SEARCH buttons to
select the first track to be programmed.
(Example: Track Number 7).
4.) When the desired track number appears in the
display press the PROGRAM button again. The
track number disappears and the program
number advances to "02".
5.) Press the
/ SKIP/SEARCH buttons to select the next track to be
programmed. When the desired track number appears in the display press the
PROGRAM button to enter that track in the program memory and advance the
display to the next program number.
PROGRAM
PROGRAM
PROGRAM
MS7608_ib061802.p65 17/6/2002, 15:2214