Filter
Top Products
9
4.) Rotate the tuning control until the exact
frequency of the desired station appears on
the display. If you have tuned to an FM
Stereo station and the Band selector is set to
FM ST, the stereo indicator will appear in the
display.
Note: If you are listening to a weak or distant FM Stereo station and reception
fades or is noisy, setting the Band selector to the FM position will normally
provide some improvement. However the sound will no longer be in stereo.
5.) Adjust VOLUME level BASS boost control as desired.
6.) When you are finished listening press the POWER/STANDBY
button on the
main unit or the remote control to turn the power 'Off'. The main display lighting
goes 'Off' and the STANDBY LED indicator comes 'On' again.
ANTENNA
FM
For FM reception there is a built-in FM antenna wire at the rear of the unit. Unravel
the wire and move it around to obtain the best reception.
AM
The AM bar antenna is inside the cabinet. To improve AM reception, you may have
to move or slightly rotate the main unit until you obtain the best reception.
FM
MS7608_ib061802.p65 17/6/2002, 15:229