Filter
Top Products
7
OPERATING INSTRUCTIONS
NORMAL PLAYBACK
Note: Although this personal CD player can read CD-R and CD-RW discs,
in addition to normal CDs, the playability of CD-R and CD-RW discs may
be effected by the type of software that was used to create the discs, as
well as the quality and condition of the blank media you are using. 100%
playability cannot be guaranteed. This is not an indication of a problem
with the player.
1.) Connect the headphones to the PHONES jack.
Set the volume control to a low level before you
begin playback.
Set the Function switch to CD position.
2.) Slide the CD Door OPEN switch to the right to
release the lock and open the CD Door.
3.) Place your disc on the center spindle with the
printed label side facing up. Press down gently
near the center hole to make sure the disc is
properly seated on the spindle.
4.) Close the door completely until it locks shut.
5.) Press the Play/Pause button.
Note: If the HOLD indicator appears in the display,
set the HOLD switch to the ‘Off’ (left) position.
“– –” flashes in the display as the player reads the
disc, then playback begins on Track 1. The Anti-
Skip indicator comes on and the playing time
shows in the display.
6.) Adjust the VOLUME and BBS (Bass Boost)
controls as desired.
1
2
VOLUME
ON
BBS
OFF
PLAY/PAUSE
To PHONES Jack
HD7098_ib080802.p65 8/8/2002, 11:007