Filter
Top Products
11
PROGRAMMED PLAYBACK
You can program the player to play only the tracks that you want to hear, in the
specific order that you want to hear them. Up to a total of 24 tracks can be
programmed. You may program certain tracks to play more than once if desired.
IMPORTANT: The player can only be programmed when it is in the Stop mode
and the total number of tracks and playing time appear on the display. If the display
is blank press the PLAY/PAUSE button to start the disc. When playback beginss
press the STOP button. If the disc was playing, press the STOP button so
that the total tracks and playing time appear on the display.
1.) While the total tracks and playing time appear on the
display press the PROG (Program) button. "PROG"
indicator and Program No. "P - 01" appear. The track
indicator flashes.
2.) Press SKIP or SKIP button until the first track
to be programmed appears in the display.
Example: Track # 7.
3.) Press the PROG (Program) button again to enter the
selected track in the memory. The flashing track
indicator returns to a "00" and the Program No.
advances to "P - 02".
4.) Repeat Steps 2 and 3 until you have entered up to a total of 24 tracks in the
memory.
5.) Press the PLAY/PAUSE button to begin
programmed playback. The “PROG” indicator remains
in the display. The player will play the tracks you
selected in the programmed order. When the last track
has played the player stops and the total tracks and
playing time appear.
6.) To cancel programmed playback, press and hold the PROG button at Stop
mode, until the “PROG” indicator disappears.
J-ASP
HD7097_ib060702.p65 7/6/2002, 15:0511