Filter
Top Products
12
DISC PLAY
1.) Insert a CD as described in the previous section and close the disc compartment.
2.) The display will then show the total number of tracks and total play time.
3.) Press the PLAY/PAUSE button. Disc
play will begin from the start of the first
track of the disc.
4.) As each track on the CD disc is played, the corresponding track number will
flash in the Calendar display. The “OVER” indicator will appear if the disc in the
player contains more than 10 tracks.
5.) A particular track can be selected using either of the CD Skip / buttons.
If this is done before pressing the PLAY/PAUSE button, disc play will start
with the selected track when the PLAY/PAUSE button is pressed.
6.) At the end of the disc, the unit will switch to stop mode.
NOTES:
• If the disc is deeply scratched, or too dirty, disc play may not start.
• If the disc is inserted incorrectly, or the disc is damaged the “no disc” indicator
will flash on display.
POP
TRACK
1
2
3
4
5
6
7
8
9
10
OVER
POP
POP
TRACK
1
2
3
4
5
6
7
8
9
10
OVER
CALENDAR
DISPLAY
ES27_ib_drafts.p65 19/3/2002, 16:0912