Filter
Top Products
09
Basic operation
Preparation
Volume adjustment
Note:
Mute
Input selection
Eject
Note:
Play/Pause
!
!
Before turning the M-100 mini component system on, check that all connections are correct and reliable. Plug
the AC powercord into a corresponding AC outlet.
Press POWER on the front panel.
Press the VOLUME and buttons on the remote or turn the volume button on the front panel to turn the
volume up and down.
Do not keep the volume at maximum level for longer periods to ensure the longevity of the unit.
Press the MUTE-button on the remote once, and the sound will be muted.
Press the MUTE-button once again to restore the sound at the last used level.
Press the INPUT-button on the front panel or the AUDIO 1- or AUDIO 2-buttons on the remote to select the
AUDIO 1 or AUDIO 2 inputs.
Press the FM/AM-button on the remote or the front panel to select TUNER. Press the FM/AM-button once again to
change between the FM and AM band.
Press the PLAY/PAUSE-button on the front panel or the CD-button on the remote to select cd mode. The unit will
start playing if the is a disc inserted.
Press the EJECT-key on the remote control or on the front panel to open the disc tray, and put the prefered disc in
the disc tray. Press EJECT once again to close the disc tray. The disc will automatically start playing.
The printed side of the disc must be faced upward!
To start playing a disc, press the PLAY-button on the remote, or the PLAY/PAUSE-button on the front panel once.
To stop a disc from playing temporarily, press the PAUSE-button on the remote or the PLAY/PAUSE-button on the
front panel. To start playing again after pause, press the PLAY-button on the remote, or the PLAY/PAUSE-button
on the front panel.