Filter
Top Products
SUBWOOFER connection
1. Connect one end of a RCA plug signal wire (not included) to Subwoofer
Socket (17) and the other end of wire to your subwoofer.
2. Turn on the unit and your subwoofer.
3. Play your home equipment.
Mains connection
This system is designed to operate on AC230V ~50Hz house current. Connecting this system to any
other power supply could result in damage to the unit, which is not covered by your warranty. If this
plug will not fit into your outlet, you should have your outlet changed by a qualified licensed electrician.
1. Unwind the AC Power Cord on the main unit.
2. Insert the plug into any convenient AC outlet.
As soon as the unit has been connected with the mains voltage, parts of the unit are in operation due
to the standby function. To switch off the unit completely pull the mains plug.
CLOCK AND TIMER
CLOCK
1. While unit is off (still plugged in), press PROGRAM (43) button over 3 seconds. blinking
on the Display (1).
2. Press / (38) button repeatedly to select 12 or 24 hour format.
3. Press PROGRAM (43) button to save and then hour two digit blinking on the Display (1).
4. Press / (38) button repeatedly until correct hour selected
5. Press PROGRAM (43) button to save hour and then minutes two digit blinking on the Display (1).
6. Press / (38) button repeatedly until correct minute selected.
7. Press PROGRAM (43) button to complete time setting. Digits will stop flashing and clock will start.
TIMER
Clock should be set before using timer.
1. Press POWER (4, 37) button to turn “ON” the unit.
2. Press and hold TIMER (40) button approx 2 seconds until “ ON” light up and two hour digit
blinking on the Display (1).
3. Press / (38) button repeatedly to adjust hour.
4. Press TIMER (40) button to save hour setting and minutes two digits blinking on the Display (1).
5. Press / (38) button repeatedly to adjust minute.
6. Press TIMER (40) button to confirm TIMER ON setting then “ OFF” light up and two hour digit
blinking on the Display (1).
7. Repeat above step 3 ~ 5 accordingly.
8. Press TIMER (40) button to confirm TIMER OFF setting and “TUNER” blinking on the Display (1).
9. Press / (38) button repeatedly to select music source.
10. Press TIMER (40) button to confirm TIMER ON music source.
11. Press / (38) button repeatedly to adjust volume level.
12. Press TIMER (40) button to confirm TIMER ON sound level and “ ” light up on the Display (1).
Note: T
o set TIMER function must adjust Digital Clock correctly.
The new setting will not save, if press PROGRAM (43) button over 10 seconds.
The timer function can be set the unit turn “ON” and turn “OFF” automatically in which time. To
do so the time must be set correctly.
021.
AC Outlet
AC Plug
2444MP3 DE,GB,FR &HR 9/7/05 3:29 PM Page 021