Filter
Top Products
Electro-Voice
®
5
Block Wall Mounting
Do not attempt to mount an Sx600 to a block or brick wall without
through-bolts and large, heavy steel backing plates on both sides of the
wall. On poured concrete walls use deep ½ inch diameter anchors that
cannot be pulled out once set. Use all 6 mounting holes.
SuperSAM
TM
Bracket
1/2 Bolts
(6 Reqd)
Approved Straps
(4 Reqd)
Figure 2: Pole Mounting
Figure 3: Block Wall Mounting
SuperSAM
TM
Bracket
1/2 Bolts
(6 Reqd)
Heavy Steel Backing Plates
Block Wall
Block Wall
Pole Mounting
Follow the pole manufacturers recommendations when mounting to a
pole. On wooden poles, make sure there is no rot or other deterioration.
Through-bolts with backing plates are highly recommended. Lag bolts
should only be used in conjunction with straps.