Filter
Top Products
The real solution to the problem requires that directionality must exist for the critical mid
frequencies as well as the upper end of the spectrum. For this to happen a new approach is
needed. An effective answer to this problem is the EVID C8.2HC
The EVID C8.2HC is designed to provide directionality through the critical voice spectrum by
employing a unique (patent pending) ported waveguide to the entire 8” driver. The resultant
package is one that is compact, easy to install and provides far more intelligibility in reverberant
or high ceiling environments than any other competitive model. The C8.2HC also is designed for
higher power, high SPL applications with a 60watt 70/100v transformer standard. No other
ceiling speaker available offers this unique solution.
The EVID 4.2, 8.2 and 8.2L – Full Range Models with Punch
EVID C4.2 Perfect for conventional rooms. It has excellent
bandwidth in an esthetically very unobtrusive
installation profile. It’s compact design fits in tight
areas. Fully rated for use in air handling spaces.
It’s 4” woofer and waveguide coupled titanium
coated dome tweeter give smooth, wide frequency
response. The enclosure is ported and tuned to
provide surprising bass response in such a
compact package. Features an easy 3-point
mounting system for quick installations. Comes
complete with mounting support ring and tile rails.
No additional accessories needed for most installations. The C4.2 would be
ideal for most office spaces along with smaller restaurants and retail space
where lower volume levels are used. It fits in close spaces and has a wide 130-
degree dispersion pattern for efficient coverage.
EVID C8.2 Unique in providing extremely high fidelity in a flush mount ceiling speaker. The
secret is the optimally tuned enclosure coupled to a large 8” coaxial driver. The
large enclosure ensures a full bottom end while the waveguide coupled tweeter
gives uniform coverage for the high frequencies.
EVID C8.2L For tight fitting spaces the 8.2L is the ideal choice. It is very close to the
performance of the C8.2 but with a shallow back can for an easier fit. The
primary difference is at 50 Hz where the output level is 6db lower than the
standard C8.2. In many installations however this is not noticeable and the
performance of the C8.2L is still far beyond that of nearly any other 8” solution in
the marketplace.
The 10.1 - Finally a Compact True Ceiling Subwoofer
So often ceiling systems had to rely on expensive surface mount
subwoofers or inadequate ceiling/flush mount options. In designing
the 10.1 we started with a mass optimized 10” woofer and a dual
ported and tuned enclosure. The internal damping provides
resonance free performance down to 45Hz. The system has a true
crossover to eliminate any “localization” problems and provides the
proper match to the full range EVID units.
The C10.1 is also an ideal companion to the EVID surface mount
speakers. The C10.1 is an especially good match to the 3.2.
EV Raw Frame Ceiling Speakers
EV has provided a wide range of component ceiling speakers for many years. Contractors have
come to expect value and performance for every EV model. Component ceiling speakers are
often a good solution when specific requirements of the job dictate using an unconventional
ElectroVoice/Dynacord BGM Guide Page 9